LED Off Road Driving Lights
LED Off Road Driving Lights are auxiliary lights that mount on the front of your vehicle for better lighting when needed. They can be powerful enough to illuminate the path ahead for a hundred+ yards.
They are available in a variety of styles including spot, fog and flood lights. Some are curved which naturally disperses the light in a wide pattern for a sleek look.
Front Projectors
Front projectors are a great way to upgrade your headlights. They add more powerful lighting to the front of your vehicle and help you see much farther than stock headlights do. They are designed to work with halogen, HID, or LED bulbs.
They have a built-in reflector that helps focus intense light in a tight, organized beam pattern. They also have a sharp cut-off line that helps prevent blinding other drivers on the road. Front projectors are available in a wide variety of sizes. Some can illuminate the road ahead of you for over a hundred yards!
When choosing a front projector, be sure to look for one that has passed strict product certification and testing. You will want a high-quality, durable bulb that can withstand harsh climates like snow and rain. It should also be able to resist damage from road debris and chemicals such as gravel, dirt, and oil. You may also want to consider a light bar with a waterproof rating.
Adding a set of front projectors to your truck can be easy with a universal retrofit kit. These kits will usually include the projectors, bulbs, and shrouds you need to do a complete installation. Alternatively, you can opt for a vehicle-specific kit that will fit perfectly onto your truck. This will require you to bake your headlight open to access the internals but may save you some time and money.
Fog Lights
Fog lights are an essential piece of any off road lighting setup. Whether you’re driving in the fog, snow, or rain, they help illuminate the ground directly in front of your vehicle, cutting down on glare and allowing you to safely drive to your destination. They also make other drivers more aware of your presence, which is a great safety bonus.
Fog lamps typically have a sharp cutoff angle at the top that prevents them from reflecting off of fog, instead only illuminating the ground in front of your car. This is a lot more effective than standard headlights which tend to cast a large void of darkness over the ground in front of your car when they’re turned on.
You can get fog lights that mount above LED Off Road Driving Lights or below your bumper, but the best mounting spot is usually right in front of the rear tires. This way they can work in conjunction with your brake lights when you’re slowing down or stopping, and they won’t be obstructed by any low driveway entrances you may encounter.
Most off-road LED fog lights are offered with a choice of either halogen or LED bulbs. We recommend choosing the LED option, as they use 1/10th of the energy halogen bulbs do, are more compact, and last longer. They’re also much more stylish, with many manufacturers offering fog lights with glass lenses or yellow tints that are easier for your eyes to process.
Driving Lights
Unlike fog lights, driving lights are used to illuminate the road or trail ahead of your vehicle. They’re usually mounted on the lower part of your windshield or on the front bumper. They can also be positioned on the front fenders or hood of your truck or Jeep.
Most driving light manufacturers design their lights to provide enough illumination for the driver to see hazards, obstacles and other drivers when traveling down narrow trails or busy paved roads. This can help prevent accidents by allowing the driver to spot dangers at a distance and avoid swerving to avoid them.
When choosing your LED off road driving lights, be sure to consider how many lumens the unit produces. This is LED Off Road Driving Lights a measure of how much light it emits from one source and is not indicative of the overall quality of the light.
The majority of driving lights are powered by LEDs. They’re small, require less power than HID bulbs and are very durable. However, LEDs convert about 85 percent of the electricity they consume into heat and only 15 percent into visible light. To minimize this effect, most LEDs are housed in cast-aluminum heat sinks to keep them cool.
Using LEDs allows manufacturers to create a more complex driving light design without worrying about the individual bulbs’ performance. They can pack several LEDs into a single housing and use advanced lens and reflector technology to create powerful, even lighting with a broad coverage area.
Rear Lights
Ample lighting output is key to reducing eye fatigue while driving at night, especially when on a trail or navigating backroads. Whether you’re rock crawling, trail riding, or just attempting to back up your trailer at night, having enough light on hand is a must. RealTruck offers a wide selection of LED off road lights to fit your needs, including cubes and pods, Rigid Industries light bars, and even round off-road lights.
If you’re adding a set of off road lights to your truck or Jeep, it’s important that you have the right tools to install them properly. First, you’ll need to decide where you want to mount the lights on your vehicle. Ideally, you’ll want to place them where they won’t interfere with your driving or the operation of other vehicle components. Once you’ve decided on a location, put down some masking tape in order to mark the spot with an exact measurement. You’ll then drill the hole, using a power drill and the correct size bit.
If you’re going to add a set of rear lights, you’ll also need to have the proper wiring in order to run them. Most of the time, this will come with the lights, but if not, you’ll need to purchase an inline fuse holder and some wire crimp connectors. Once you’ve done this, you can connect the wiring to the switch on your dash and the battery terminal.
